Ascoglass FR

INTRODUCTION

ASCOGLASS FR is highly durable, exible, Alkali Resistant and it is made with an ideal engineering glass woven fabric then coated by acrylic acid copolymer liquid. ASCOGLASS FR has excellent properties including high water resistance, exibility, softness, resistance to aging and attack from breakdown. It is widely used for waterproong in roong applications, reinforcement for natural marble, plasterboard, and Exterior Insulation Finishing Systems (EIFS). It complies with BS/EN 1170.

 

RECOMMENDED APPLICATIONS

WATERPROOFING
Joint reinforcement
Crack repairs
 

FEATURES & BENEFITS

Easy to install, especially for large surface areas.
Highly flexible.
Durable and reliable: resistant to chemical agents.
It is free from corrosion and unaffected by alkali.
Light and easy to transport.
Adaptable to uneven surfaces.
Easy and safe to use – only simple tools (scissors, utility knife) needed.
Ideal use as an interior and exterior waterproofing, cracks and reinforcement etc.
 

TECHNICAL PROPERTIES

Fibre Type Alkali Resistant
Fabric Weight 145 GSM ± 5%
Color White/ Green
Tensile Strength 120 KN/m
Woven Structure Leno
Size 5 x 5, 10 x 10 etc.
Roll Size 1 m wide x 50 m length roll

PACKAGING

Available in variants of 45 GSM, 110 GSM and 145 GSM.
Available in a packed roll of 1 m X 50 m.

STORAGE

Keep away from heat and moisture and in suitable packaging. Best conditions for storage are 15°C – 35°C, within a humidity range of 35% – 65%.

 

OPTIONAL USE OF REINFORCING FIBER ROLL

  1. i. Cut Fiber Roll to required sizes and place aside. Measure and pre-cut fiber roll to cover entire length of cracks etc. and at least 1 tile width of each side of crack (20 cm (8") minimum).
  2. ii. Apply a generous coat of ASCOGUARD PRIME slightly wider than the fabric to be used over crack, with a brush or roller.
  3. iii. Embed reinforcing fiber roll into wet ASCOGUARD PRIME with a roller or brush so that it bleeds through fiber roll.
  1. iv. Once fiber roll is thoroughly embedded, apply a second coat of ASCOGUARD PRIME to create a void free membrane, and allow to dry.
  2. v. Apply a final coat of ASCOGUARD PRIME.

* Kindly follow the required health and safety precautionary measures. (Refer our Safety Data Sheet for more details)

 
 

BROCHURE